Before the workshop started today, I saw a very cool video on youtube that I'll show, just because I thought it needs to be seen:

We started to day whiteboarding our summaries of Arons' Chapter 5. For those that haven't read it, it's a fantastic book with sharp insight into the shortcomings of teaching physics. It's written at a very high level, but once you get used to it, it has a lot to tell you about how you should be teaching physics.

From there we finished up Unit VIII

**What worked?**

- We liked the demo with making the bowling ball move in a circle
- Getting insight into what to do (and what not to do) during a lab
- once members determine the job they can do, stick with it
- POGIL
- Student discussions help them get understanding as to what lab was showing
- The idea that data isn't wrong, the method of isolating variables may not be sufficient
- The fact that we (the students) are always finding the graphical and mathematical relationships
- once you get the hang of it, you know what to do when the models get more difficult
- new lab, same analysis

**What didn't work?**

- Teacher notes require editing/more detail on graphs
- Centripetal force lab

**Notes:**

- Even though we knew what the outcome should be, struggling through labs is very helpful
- For labs that fail (class completely lost), come back as a teach demo and explain how you are doing the experiment differently
- demo vs lab less time if you don't have it (due to lost period of failed lab)
- If you have problem students or limited supplies, split the class and have half do the lab and the other half work on problems & switch part way through.
- Use record player and put a thin piece of wood (less than 1x4) across the deck, have students measure coefficient of sliding friction $\mu_{k}$, and predict what is the greatest radius to place the penny such that it won't slip. (Find $\mu_{k}$ from maximum angle with no slip).
- vernier has a lab for accelerometer and turntable
- difficult to due with calculators, not too bad with computers
- Would be nice to see a paradigm lab for universal gravity
- One member mentioned that this graphical analysis is very important as the next generation standards will implement a lot more graphical analysis.

Jon mentioned that he does this unit a little differently, in that he has his students provide the definition of momentum on the Unit VIII test. At the start of class he shows that list to the students. What he has found is that most have a very good concept of momentum. He said the modeling unit focuses more on changes in momentum (which tends to have more errors). Usually from their definitions, he can lead them to the equation for momentum:

$\large \vec{p} = m\vec{v}$

or

$\large \Delta \vec{p} = m \Delta \vec{v}$

He said he also makes sure that they know that the units are $\left(kg \cdot m/s\right)$. After being part of the Global Physics Department Meetings, Andy Rundquist, aka superfly, mentioned that he calls this "derived" unit a pom (particle of momentum), others at the meeting, name it after one of the students. Jon mentioned that he names it after the first student that asks what is that unit called.

Next, Jon and Chris showed us the beginnings of collisions. They attached a force probe to a ring stand at the end of a track. They replaced the hook with a rubber bumper, and then had the extended spring end of the cart collide with the rubber bumper. At the other end of the track they had a motion detector hooked up. After zeroing and making sure that all probes were defined in the right direction, they had them collide. On the projected screen, they had a plot of $F$ vs $t$ for the force probe data and a plot of $v$ vs $t$ for the motion detector.

They used the stats function on the $v$ vs $t$ plot to find the cart's velocity before and after the collision (max and min values), and they multiplied these by the mass of the cart. (using the equations from the beginning of the unit $\large \vec{p} = m\vec{v}$.

Jon then walked/guided us through the derivation of Newton's second law to show the relationship between Impulse (J) and Momentum

$F = ma$

$\large a = \frac{\Delta v}{\Delta t}$

$\large F = m \frac{\Delta v}{\Delta t}$

$F \Delta t = m \Delta v$

Since the impulse changes the momentum, the magnitude of the change in momentum should be equal to the impulse. Since impulse it

*force*times

*time,*we can find that quantity as the area under the $F$ vs $t$ plot. Jon used the integration tool in LoggerPro, and amazingly enough, the value "matched" the change in momentum calculated from the $v$ vs $t$ plot.

We then jumped into Unit IX worksheet 1.

We agreed that #7 has some issues in that, for a rocket to go anywhere, it must lose mass. Since we aren't given that information, it technically can't be solved. However, Jon mentioned that we often start with idealized situations, and then add complexity. We also agreed that most of our students wouldn't know this anyway.

As we came back from lunch, we watch the PSSC video on Frames of Reference:

After that video, Jon and Chris showed us a cool video for E&M:

They next had a "student" come to the front of the room and sit on a stool, which was on a turntable. They put a tennis ball in each of the student's hands, and started gave the student a spin. While spinning the student was told to release the ball so that it his a certain target.

Jon then thanked the student, removed the stool and got up onto the turntable himself. He then had Chris throw a bowling ball to him. After getting help to stop spinning, he threw the ball back to Chris.

From there, we moved into the actual paradigm lab. We had a track with 2 carts. Most groups had a small picket fence/flag to insert into the top of the carts. Other groups just used a bent index card. They also had two ringstands, each with a photogate attached.

Chris and Jon showed us several ways that the carts could combine, and we as a class agreed on 7 combinations we would study in our 7 groups.

- 1 stationary cart, 1 moving with it's spring plunger extended (between the two carts)
- Both carts moving towards each other, one with plunger extended
- One car moving towards the other, colliding with velcro between making carts stick
- 1 moving cart, with magnetic repulsion causing the "collision"
- Varying the mass of one cart, 1 cart moving w/ plunger out
- varying mass of cart with both carts moving w/ plunger out
- Both carts moving with velcro collision

**What can we measure?**

**Purpose:**

To determine the graphical and mathematical relationships that exists between the total momentum of the system before and after a collision.

Right at the end of the day, Jon showed us a few more demonstrations. First he hung a electrical tape "nest" from the ceiling. Here are pictures:

Inside that cradle he placed a raw egg. He set the length of the string to stop just before the floor, seen here:

Then, while standing on a stool, said to the students, think of this as you driving the car one day. You happen to come around a bend in the road, texting away, and a tree decides to move itself into the road. What happens if you are properly belted? With that, he dropped the egg. Since it's in the nest, it bounces like a bungee jumper. In his class, he then pulls another raw egg out of his pocket and says, this is what happens if you forget about your seat belt {drops egg -> splat!}. Any questions?

Hey then gets 2 students to help him with his next demonstration. He has one student help him hold a cotton table cloth as seen here:

After that, FIU PER asked us to go into the hallway for a practice poster presentation of the research before they head off to the AAPT national meeting in a few weeks. The couple things that jumped out to me {yes I'm probably butchering their edu-jargon terms, but I'll give you the basic idea}:

- To great strategies for modeling are seeding and passive direction
- seeding: give one of the groups (especially struggling groups) an important insight, so they have a key ingredient to share during the board meeting.
- passive direction: as the teacher, don't be inside the circle (sitting w/students) if they don't need you. Allow them to take ownership of the meeting. During the group work, determine where the misconceptions and errors are. Let the groups work them out, only step in if they are floundering or off task.
- The guy had a third term he dropped, but I don't remember it. Basically he talked about learning what the students were doing, and planning you questions while they are working. Give the class a chance to ask them, and add them in as necessary.
- Another poster talked about one powerful benefit of whiteboarding, namely that it allows students to interconnect with their peers, which improves their sense of belonging. This improved attitude they have shown, had increased retention rates in the subject at the college level. They speculate it would have an even more profound at the HS level.
- A third poster described how modeling allows for personal (mastery) interactions and more importantly "vicarious" interactions
- Their research has shown this is especially important for female students' success in physics.

## No comments:

## Post a Comment